Victory Motorcycle Error Codes

P-CODE Number SPN FMI Description
P0107 102 4 Manifold Absolute Pressure sensor circuit voltage low • MAP portion of TMAP sensor circuit is open. or shorted to ground.
P0108 102 3 Manifold Absolu1e Pressure sensor circuit voltage high • MAP portion of TMAP sensor circuit is shorted to battery voltage.
P0112 105 4 Intake Air Temperature Sensor voltage low • Temperature portion of TMAP sensor circuit is shorted to ground.
P0113 105 3 lntake Air Temperature Sensor voltage high • Temperature portion of TMAP sensor circuit is open, or shorted to battery voltage.
P0117 110 4 Cylinder Head Temperature (CHT) Sensor voltage low • circuit shorted to ground.
P0118 110 3 Cylinder Head Temperature (CHT) Sensor voltage high • circuit open, or shorted to battery voltage.
P0122 51 4 Throttle Position Circuit. voltage low • TPS open, or shorted to ground.
P0123 51 3 Throttle Position Circuit voltage high • TPS shorted to battery voltage.
P0171 520204 17 Fuel Correction • system too lean Cyl 1 (Front).
P0172 520204 15 Fuel Correction • system too rich Cyl 1 (Front).
P0174 520205 17 Fuel Correction • system too lean Cyt 2 (Rear).
P0175 520205 15 Fuel Correction • system too rich Cyl2 (Rear).
P0181C 520267 31 Kickstand Switch condition exists.
P0217 110 16 Engine Temperature Sensor • Temperature too high.
P0231 1347 5 Fuel Pump Driver Circuit • open or shorted to ground.
P0232 1347 3 Fuel Pump Driver Circuit • shorted to battery +.
P0261 651 5 lnjector 1 (Front Cylinder) driver circuit open or shorted to ground.
P0262 651 3 lnjector 1 {Front Cylinder} driver circuit shorted to battery voltage.
P0264 652 5 Injector 2 (Rear Cylinder) driver circuit open or shorted to ground.
P0265 652 3 Injector 2 {Rear Cylinder) driver circuit shorted to battery voltage.
P0336 636 8 Crankshaft Position Sensor fault • missing tooth signal not detected in CPS signal within the correct period of time.
P0443 520202 3 Canister Purge Valve • driver circuit short to battery +.
P0444 520202 5 Canister Purge Valve • driver circuit open or grounded.
P0503 84 2 Vehicle Speed Sensor • data erratic, intermittent. or missing.
P0508 520193 5 Idle Air Control (IAC) circuit or IAC motor shorted to ground.
P0509 520193 11 Idle Air Control (IAC) circuit or IAC motor open or shorted to battery voltage.
P0519 520193 7 Idle Air Control (IAC) position out of range.
P0562 168 4 System Voltage Low • System voltage too low after the engine has been running for a specific period of time.
P0563 168 3 System Voltage High • System voltage above allowable limit.
PO914 523 2 Gear Position Sensor Signal • signal fault
PO916 523 4 Gear Position Sensor Signal • voltage too low
PO917 523 3 Gear Position Sensor Signal • voltage too high
P1217 110 0 Engine Temperature Sensor • engine overheat shutdown. (2009 only)
P1351 1268 5 Ignition Coil Primary Driver Cyl 1 (Front) • driver circuit open or grounded
P1352 1269 5 Ignition Coil Primary Driver Cyl 1 (Front) • driver circuit short to battery +
P1353 1268 3 Ignition Coil Primary Driver Cyl 2 (Rear) • driver circuit open or grounded
P1354 1269 3 Ignition Coil Primary Driver Cyl 2 (Rear) • driver circuit short to battery +
P1501 520200 2 Tipover Sensor (Rollover) • signal fault.
P1502 520200 4 Tipover Sensor (Rollover) • voltage low
P1503 520200 3 Tipover Sensor (Rollover) • voltage high.
P1504 520200 14 Tipover Sensor (Rollover) • tipover condition detected.
P1651 1213 5 Check Engine Lamp {MIL) • MIL lamp driver circuit open or shorted to ground. (2009/2010 only)
P1653 1213 3 Check Engine Lamp (MIL) • MIL lamp driver circuit shorted to battery voltage. (2009/201O only)
P1710 2369 5 Right Turn Indicator Driver Circuit • driver circuit open / grounded. (2009/2010 only)
P1711 2369 3 Right Turn Indicator Driver Circuit • driver circuit shorted to battery + (2009/2010 only)
P1714 2367 5 Left Turn Indicator Driver Circuit . driver circuit open / grounded. (2009/2010 only)
P1715 2367 3 Left Turn Indicator Driver Circuit - driver circuit shorted to battery + (2009/2010 only)
Source